Auto Hot Laminator , hot laminating machine GW3-1700
| Model |
GW3-1700 |
| Nominal Voltage |
220V |
| Power |
90W |
| Heating Power |
1500W |
| Frequency Response |
50HZ-60HZ |
| Operating Temprature |
0°C-130 °C |
| Scope of Suitable film thickness |
10-250μm |
| Auto expose film & collect paper |
Motor |
| Warm-up time |
0-10 minutes |
| Max Laminating Width |
1580mm |
| Max laminating speed |
0-10m/min |
| Max laminating thickness |
40mm |
| The rise height of roller |
40mm |
| Pressure adjustment method |
Manual |
| Foot-switch |
Yes |
| Speed gear setting |
stepless |
| Max diameter of film |
200mm |
| Inner diameter of film |
2.25 inches, 3 inches |
| Diameter of roller |
130mm |
| GW |
170kg |
| Product size |
1980*570*1240mm |
| Packaging size |
2040*700*680mm |
GW3-1700 Machine Configuration
1.Special method of putting film under roller from the back, easy operating.
2.Infrared ray control temprature,no hurt to roller,Much precise control tempreture
3.Single Linkage control system, Up - down roller easy.
4.Foot switch/ auto laminating, these 2 methods laminating
5.Stepless speed adjusting.
6.Trun in reverse function
7.Auto expose laminating paper, auto rolling finished papers.
8.Only one person operate machine, save labor cost.
9.Temprature to 60 °C to avoid bubble thoroughly.
10.High rate of finished laminating products, whole roll of film 50M not tilted laminating
11.Film and paper tightness-degree system, make film good tension, much down wrinkle of laminating. |
